Processor
Single PGA478 ZIF socket
Supports Intelฎ P4 "Northwood/Prescott"
processors; supports 800/533MHz FSB
Onboard VRM 10.0
Chipset
Intelฎ 875P (Canterwood) MCH
Intel 82801EB (ICH5) South Bridge
MCH + ICH5 (or ICH5R)
Winbond W83627HF LPC I/O ASIC
Memory
Supports up to four DDR DIMM sockets
(Dual Channel Configuration)
Up to 4GB of unbuffered DDR400/333 memory
Registered memory is NOT supported
Supports ECC/non-ECC type memory modules
Expansion Slots
Two 32-bit (5-volt) 33MHz PCI v2.2 slots
Integrated I/O Interfaces
One Floppy connector for up to two drives
Two 9-pin UART serial ports
(one header via cable)
Four USB 2.0 ports (2 rear ports & 2 headers)
One parallel port (through header via cable)
PS/2 Mouse & keyboard poarts
Integrated PCI ATA & SATA
Intel ICH-5 or ICH-5R
Up to four Enhanced UDMA and SATA devices
Dual channel UDMA Master mode for up to
4 devices
- Supports for UDMA 33/66/100 IDE drives
and ATAPI compliant devices
Support two independent SATA ports
- Data transfer at 1.5 Gb/s
- Supports RAID 0 or 1 (only with ICH-5R)
Integrated LAN Controllers
Intel 82547EI CSA 10/100/1000 controller
Intel 82540EI PCI 10/100/1000 controller
WOL/PXE/ASF2.0 support
Two RJ-45 LAN connectors w/ LEDs
Integrated PCI Graphic
ATIฎ RAGE XL PCI controller
8MB frame buffer of video memory
System Management
Winbond W83627HF w/ hardware monitoring
One 3-pin CPU & two 3-pin chassis fan headers
(temperature controlled)
2-pin Chassis Intrusion headers
Two temperature sensors & voltage monitoring
Watchdog timer
Server Management (option)
QLogic Zircon Baseboard Management
Controller (BMC) based on powerful ARM7
technology
Tailored for IPMI highest 1.5 Spec.
Supports KCS and BT styles
Supports flexible Windows and Linux based
Management Solution
Supports RMCP and SNMP protocols
Supports ASF standard and EMP
I2C serial multi-master controllers and UARTs
Built-in IPMB connector
Supports remote Power on/off and reset support
(IPMI over LAN)
Server Management Daughter card via built-in
2x25 header
BIOS
Award BIOS on 4Mbit Flash ROM
ACP1.1 / APM1.2
User settings of HW monitoring
Auto configuration of IDE hard disk types
Quick boot and multiple boot options
LAN remote boot (PXE) support
Event Log support (4K EEPROM)
Power Management: S1, S3, S4, and S5
Form Factor
Flex ATX (9.0" x 8.0"; 229mm x 203mm)
ATX12V power connectors
Side by side PS2 Mouse/Keyboard connectors
Stacked 2 USB connectors and RJ45 LAN
connector w/LEDs
One Serial connector
One VGA connector
One RJ45 LAN connectors w/ LEDs
Regulatory
FCC DoC (Declaration of Conformity)
European Community CE