CPU

Intel® Pentium® 4 Processor with Hyper-Threading Technology
- 800MHz/533MHz system data bus
Intel® Pentium® 4 Northwood processor
- 533MHz/400MHz system data bus
Intel® Celeron® Northwood processor
- 400MHz system data bus

CPU Socket

Socket 478

Chipset

Intel® 848P chipset
- Intel® 848P Memory Controller Hub (MCH)
- Intel® 82801EB I/O Controller Hub (ICH5)

Memory

Two 184-pin DDR DIMM sockets
Supports up to 2GB system memory
Synchronous operation with processor system bus
-PC2100/PC2700/PC3200 (DDR266/DDR333/DDR400) with 800MHz FSB CPU. DDR333 will
run at 320MHz memory frequency when used with 800MHz FSB CPU.
- PC2100/PC2700 (DDR266/DDR333) with 533MHz FSB CPU
- PC2100 (DDR266) with 400MHz FSB CPU
Supports non-ECC (x64) DIMM using 128Mb, 256Mb or 512Mb
Supports unbuffered DIMMs

BIOS

Award BIOS, Windows® 98SE/2000/ME/XP Plug and Play compatible
CPU/DRAM overclocking
AGP/PCI overclocking
CPU/DIMM/AGP overvoltage
Supports SCSI sequential boot-up
2Mbit flash memory

Power Management

Supports ACPI STR (Suspend to RAM) function
Wake-On-Events include:
- Wake-On-Keyboard/Mouse
- Wake-On-USB Keyboard
- Wake-On-Ring (external modem)
- Wake-On-LAN
- RTC timer to power-on the system

Audio

C-Media CMI9739a 6-channel codec
20-bit stereo full-duplex codec with independent variable sampling rate
S/PDIF-in/out interface
6-channel audio output

LAN

Uses Realtek RTL8101L fast ethernet controller
Integrated IEEE 802.3, 10BASE-T and 100BASE-TX compatible PHY
Full duplex support at both 10 and 100 Mbps

PCI IDE

Supports ATA/33, ATA/66 and ATA/100 hard drives
PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.)

SATA IDE

Supports two SATA (Serial ATA) interfaces which are compliant with SATA 1.0
specification (1.5Gbps interface)

AGP

Supports 1.5V AGP 8x (2.13GB/sec.) and AGP 4x (1066MB/sec.) for 3D graphics
applications (AGP 2x and 3.3V AGP card are not supported)
Supports AGP 3.0 and AGP 2.0 spec.

Rear Panel I/O Ports

4 USB 2.0/1.1 ports
1 RJ45 LAN port
1 DB-9 serial port
1 DB-25 parallel port
1 mini-DIN-6 PS/2 mouse port
1 mini-DIN-6 PS/2 keyboard port
2 S/PDIF RCA jacks (S/PDIF-in and S/PDIF-out)
3 audio jacks: line-out, line-in and mic-in
2 audio jacks for center/bass and rear out

I/O Connectors

2 connectors for 4 additional external USB 2.0/1.1 ports
1 front audio connector for external line-out and mic-in jacks
1 CD-in internal audio connector
1 S/PDIF connector for optical cable connection
1 connector for IrDA interface
2 Serial ATA connectors
2 IDE connectors
1 floppy connector
2 ATX power supply connectors
1 Wake-On-LAN connector
2 fan connectors for CPU fan and chassis fan

Expansion Slots

1 AGP slot
5 PCI slots

Compatibility

PCI 2.2 and AC ’97 compliant
Intel AGP version 3.0

PCB

4 layers, ATX form factor
29.5cm (11.61") x 19cm (7.48")

All specifications above are subject to change without prior notice.