CPU

Intel® Pentium® 4 Processor with Hyper-Threading Technology
- 800MHz and 533MHz FSB
Intel® Pentium® 4 Northwood Processor
- 533MHz and 400MHz FSB
Intel® Celeron® Northwood processor
- 400MHz system data bus

CPU Socket

Socket 478

Chipset

Intel® 865PE chipset
- Intel® 865PE Memory Controller Hub (MCH)
- Intel® 82801EB I/O Controller Hub (ICH5)

Memory

Supports dual channel (128-bit wide) memory interface
- Each channel supports 2 DIMM sockets
Supports up to 4GB system memory
Synchronous operation with processor system bus
-PC2100/PC2700/PC3200 (DDR266/DDR333/DDR400) with 800MHz FSB CPU. DDR333 will run at
320MHz memory frequency when used with 800MHz FSB CPU.
- PC2100/PC2700 (DDR266/DDR333) with 533MHz FSB CPU
- PC2100 (DDR266) with 400MHz FSB CPU
Supports non-ECC (x64) DIMM using 128Mb, 256Mb or 512Mb
Supports unbuffered DIMMs

BIOS

Award BIOS, Windows® 98SE/2000/ME/XP Plug and Play compatible
CPU/DRAM overclocking
AGP/PCI/SATA overclocking
CPU/DIMM overvoltage
Supports SCSI sequential boot-up
Flash EPROM for easy BIOS upgrades
Supports DMI 2.0 function
2Mbit flash memory

Power Management

Supports ACPI specification and OS Directed Power Management
Supports ACPI STR (Suspend to RAM) function
Wake-On-Events include:
- Wake-On-Keyboard/Mouse
- Wake-On-USB Keyboard
- Wake-On-Ring (external modem)
- Wake-On-LAN
- RTC timer to power-on the system

Hardware Monitor

Monitors CPU/system temperature and overheat alarm
Monitors CPU/1.5V/5VSB/VBAT/3.3V/5V/±12V voltages and failure alarm
Monitors CPU/chassis/second fan speed and failure alarm
Automatic chassis/second fans on/off control
Read back capability that displays temperature, voltage and fan speed
Opened chassis alarm

Audio

20-bit stereo full-duplex codec with independent variable sampling rate
High quality differential CD input
True stereo line level outputs
S/PDIF-in/out interface
6-channel audio output

LAN

Uses Realtek RTL8101L fast ethernet controller
Integrated IEEE 802.3, 10BASE-T and 100BASE-TX compatible PHY

PCI IDE

Supports ATA/33, ATA/66 and ATA/100 hard drives
PIO Mode 4 Enhanced IDE (data transfer rate up to 14MB/sec.)

SATA IDE

Supports two SATA (Serial ATA) interfaces which are compliant with
SATA 1.0 specification (1.5Gbps interface)

AGP

Supports 1.5V AGP 8x (2.13GB/sec.) and AGP 4x (1066MB/sec.) for 3D graphics applications
(AGP 2x and 3.3V AGP card are not supported)
Supports AGP 3.0 and AGP 2.0 spec.

Rear Panel I/O Ports

2 USB 2.0/1.1 ports
1 RJ45 LAN port
2 DB-9 serial ports
1 DB-25 parallel port
1 mini-DIN-6 PS/2 mouse port
1 mini-DIN-6 PS/2 keyboard port
1 game port
3 audio jacks: line-out, line-in and mic-in

I/O Connectors

3 connectors for 6 additional external USB 2.0/1.1 ports
1 front audio connector for external line-out and mic-in jacks
1 CD-in internal audio connector
1 surround connector
1 S/PDIF-in/out connector
1 connector for IrDA interface
2 Serial ATA connectors
2 IDE connectors
1 floppy connector
2 ATX power supply connectors
1 Wake-On-LAN connector
1 opened chassis alarm connector
3 fan connectors for CPU fan, chassis fan and second fan

Expansion Slots

1 AGP slot
5 PCI slots

Compatibility

PCI 2.2 and AC ’97 compliant
Intel AGP version 3.0

PCB

4 layers, ATX form factor
30.5cm (12.05") x 21cm (8.26")

All specifications above are subject to change without prior notice.