Module Specifications:

Module Size: 256MB
Package: Ballistix 184-pin DIMM
Feature: DDR PC3200
Configuration: 32Meg x 64
DIMM Type:
Error Checking: Non-parity
Speed: DDR400
Voltage: 2.8V
Memory Timings: CL=2


The Ballistix™ line of high-performance memory modules features advanced speed grades, low latencies, and integrated aluminum heat spreaders. Ballistix modules are specficially built for performance enthusiasts who want to push the performance envelope without worrying about data loss or corruption, mysterious intermittent errors and display problems, or worse-the dreaded BSOD!

A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold or tin pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.
184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. Each 184-pin DIMM provides a 64-bit data path, so they are installed singly in 64-bit systems. 184-pin DIMMs are available in PC2100 DDR SDRAM or PC2700 DDR SDRAM. To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information on which memory technology is used by your system is included in the Memory Selector.)

The number of black components on a 184-pin DIMM may vary, but they always have 92 pins on the front and 92 pins on the back for a total of 184. 184-pin DIMMs are approximately 5.375" long and 1.25" high, though the heights may vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins.