CPU - Socket 478 for Intel Pentium 4/ Celeron up to 3.06GHz+
- Intel Hyper-Threading Technology ready
Chipset Intel 845PE
Intel ICH4
Front Side Bus 800 (overclocking) / 533 / 400 MHz
(*Note: A 800FSB CPU requires a PC3200 DDR DIMM. Intel Prescott CPUs can only support 533 MHz FSB on this motherboard. 800MHz FSB works with Intel Northwood processors only.)
Memory 2 x 184-pin DIMM Sockets support max. 2GB PC3200(overclocking)/PC2700/PC2100 non-ECC DDR SDRAM memory
(*Note: Obtain PC3200 DDR DIMMs only from ASUS qualified vendors for better system performance.)
Expansion Slots 1 x AGP 4X (1.5V only)

4 x PCI
Storage 2 x UltraDMA 100/66/33
Audio ADI AD1888 SoundMAX 6-channel audio CODEC
Support S/PDIF out interface
LAN Realtek RTL8101L 10/100 Mbps LAN PCI controller
USB Integrated 6 USB2.0 ports
Extreme Overclocking - ASUS JumperFree
- Flexible CPU Core Voltage Adjustments in 0.025V increments over defaults
- SFS (Stepless Frequency Selection) from 200MHz up to 300MHz at 1MHz increment
- Adjustable FSB/DDR ratio.
- ASUS C.P.R. (CPU Parameter Recall)
Special Features Support S/PDIF out Interface
My Logo
ASUS C.P.R. (CPU Parameter Recall)
ASUS EZ Flash
ASUS CrashFree BIOS 2
Back Panel I/O Ports 1 x Parallel
1 x Serial
1 x PS/2 Keyboard
1 x PS/2 Mouse
1 x Audio I/O
1 x RJ45
1 x S/PDIF out Interface
4 x USB 2.0
Internal I/O Connectors - 1 x USB 2.0 connector support additional 2 USB 2.0 ports
- CPU / Chassis FAN connectors
- Chassis Intrusion
- 20-pin ATX Power connector
- 4-pin ATX 12V Power connector
- CD / AUX audio in
- Game/MIDI port connector
- 20 Pin Panel connector
- Front Panel Audio connector
BIOS Feature 3Mb Flash EEPROM
AMI BIOS with enhanced ACPI,DMI,PnP,TCAV
SM BIOS 2.3, ASUS EZ Flash, ASUS C.P.R, ASUS CrashFree BIOS 2
Industry Standard PCI 2.2, USB2.0
Manageability WOL by PME,WOR by PME
Power Requirement ATX power supply (with 4-pin 12V plug)
Support CD Drivers
ASUS PC Probe
ASUS LiveUpdate Utility
Trend Micro PC-cillin 2002 anti-virus software (OEM version)
Accessories User's manual
1 x UltraDMA cable
1 x FDD cable
I/O shield
Form Factor ATX Form Factor 12"x 7.0"(30.5cm x 17.8cm)