Form factor ATX 12V
Watts 400W
Remote ON/OFF Control (The power supply Shall accept a logic collector level which will disable / enable all output voltage;excluding +5V standby)
Temperature range Operating 0~50
Storage -20~+65
Temperature coefficient 0.01%/
Transient response (output voltage returns in less Than 1 ms max . following a 25% Load change )
Hold-up time At 230V/ 50 Hz 20.0 ms minimum
Dielectric withstand Input / output 1800VAC for 1 second
Input to frame ground 1800VAC for 1 second
Humidity 5~95% RH
Efficiency Min 65%
Typical 70% (at full load)
Power good signal Turn-on delay from 100ms to 500ms
Over voltage protection (+5V +3.3V+12V)
Input Characteristics Inrush current 80A cold, 100A warm at 264VAC ...
No user reviews yet, click here to add the first review! 
N/A
