Feature
Intel Pentium® 4 Processor (Willamette/Northwood)
Socket 478 with FSB 400/533MHz
3 DDR266/200 Memory Sockets
6 channel AC 97 Audio
2 ATA100 Channels, up to 4 ATA 100 IDE Devices
6 USB 2.0/1.1 Ports (4 ports by optional cable)

Processor
Socket 478 Intel Pentium® 4 Processor (Willamette/Northwood)

FSB
400/533 MHz

Chipset
North Bridge : Intel 845E
South Bridge : Intel ICH4
Audio Codec : Realtek ALC650 Codec
I/O Chip : Winbond Smart I/O W83637HF

Memory
3 * DDR Sockets
DDR266/DDR200 unbuffered /none-ECC DDR SDRAM up to 2GB( DIMM1 uses 2 Banks/ DIMM2 & DIMM3 share 2 Banks )

Expansion Slots
1 x AGP 4X slot ( 1.5V only)
6 x PCI slots (PCI 2.2 compliant)
1 x CNR slot (Optional )

IDE Connectors
2 ATA100/66 channels, up to 4 ATA 100 IDE devices

Onboard I/O Connectors
1 x Floppy Connector
2 x USB 2.0/1.1 header (4 ports by optional cable)
1 x CD_IN header
1 x Smart Card Interface
1 x Memory Sticker Interface
1 x S/PDIF in/out header (S/PDIF in/out cable optional)
1 x CPU fan header with fan rotation detection function
2 x System fan headers ( 1 fan rotation detection function)
2 x 5 pin system panel header (Intel spec)
1 x Front audio header (Intel spec)
1 x IrDA header
1 x Case Open detection header
1 x Wake on LAN

I/O via Back Panel
PS/2 keyboard/mouse, 2 x USB(2.0/1.1), 2 x Com(serial), 1 x Parallel, 1x Game/Line-in/Line-out/MIC-in

Power
20-pin ATX power connector, 4-pin ATX 12V power connector

BIOS Feature
3Mb Flash EEPROM
Award BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC Timer

Hardware Monitoring
2 FAN sensors, CPU/System voltages and temperature monitoring

Special Feature
Zero Jumper Design
Adjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemory for overclocking
Watch Dog Timer (auto-reset system when it can not handle overclock configurations)
AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)


Form Factor
ATX (244mm x 305mm)