Anodized Aluminum Alloy Chassis:

Lower the System Internal Temperature

The Aluminum Alloy, which acts as a big heat sink, can conduct heat much faster than the steel. It keeps the system internal temperature 15-30 ºF lower than the traditional steel chassis.

Light Weight: 11 lbs. (net weight w/o PSU)

About half weight of steel chassis.

Corrosion & Oxidation Resistance:

Anodizing forms a tough coating on the chassis & resists corrosion.

Thumbscrews for covers:

It is screwdriver free to open the top and side covers of the system for basic maintenance. The only tool you need is your finger.

Material thickness: 1.2mm


Motherboard tray supports ATX, MICRO-ATX, XEON–ATX motherboard/10 bays

Cooling Fans (Ball Bearing):

Two Intake Fans:

Two 80mm intake fan are mounted on the back of faceplate to increase in taking outside cold air to the motherboard.



Exhaust Fan:

An 80mm internal fan is mounted on the rear of case to carry out the heats


Intake Cooling Fans

Front Peripheral Access: (For model number has D)

Type-D has Joystick Port, Audio jacks, Volume control, USB, and IEEE1394 port

(All ports/jacks compatible with any motherboard/card)

Tip!

Plugging the Audio cables to the jacks of voice/fax modem can enable the users to easily utilize the voice functions of the voice/fax modem card just with a removable Mic/Ear phone headset.


Front Peripheral Access type-D

Power Supply:

Convenient bi-directional PSU installation design.



Pentium IV Ready Power Supply with 300W continuous output, 330W peak surge, Intel® & AMD® approved (Athlon XP 1600+) is available.


SH-300WA8-1 PS/2 redundant hot-swap power supply 300Wx2 (AMD Athlon Approved) Pentium IV ready is another option.


Optional Hot Swap Power Supply

Optional feature:

A supporting arm hold an 8x8 cm internal fan can help drawing the cold air to cool down the CPU and M/B chips and six adjustable expansion card holders which can hold the cards firmly in the slots while systems are being shipped to the customers; Add extra fans to side of case; add two more 3.5" bays (total will be 12 bays); install wheels on the case instead feet; 300W & 400W power supply; hot-swap power supply.


*Optional Internal Fan and Card holders

Dimensions: 8.3(w) x 17.5(h) x 19.3(d) inches

Bays: 5.25¨x4 external; 3.5¨x2 external; 3.5¨x4 internal

Note: The feet can be turned 90 degree to be hidden.




*Intake fan filters available *Optional 2 side fan & 2 bay

(F) option:

There are two 80mm ball bearing exhaust fans mounted on the left side case cover for the model number with (F) or optional for all MSR series cases except the model number with *AP.



*The model number with AP cases come with two 120mm intake fans that are mounted on a fan bracket inside case. (the optional extra two 3.5" bay are sold separately)