Feature


Intel Pentium® 4 Processor (Celeron/Willamette/Northwood/Prescott)
Socket 478 with FSB 400/533/900+(by overclocking ) MHz
( FSB 900MHz + setting available by overclocking )
4 DDR 333/266/400(by overclocking) Memory Sockets
( Dual Channel DDR333/DDR400 by overclocking )
6 Channel AC97 Audio
3Com 10/100 Ethernet LAN
2 Serial ATA150 Channels,
2 ATA100 Channels, up to 4 ATA 100 IDE Devices
8 USB 2.0/1.1 Ports (6 ports by optional cable)


Processor
Socket 478 Intel Pentium® 4 Processor (Celeron/Willamette/Northwood/Prescott)


FSB
400/533/800 MHz( FSB 900MHz + setting available by overclocking )


Chipset
North Bridge : Intel 865P
South Bridge : Intel ICH5
LAN Chip : 3Com 3C910-A01
Audio Codec : Realtek ALC650
I/O Chip: Winbond Smart I/O W83627HF


Memory
4 * DDR Sockets:
DDR400/333/DDR266 NON-ECC DDR SDRAM up to 4GB
Note 1: If the FSB of your CPU is 400 MHz, the memory speed supports only DDR 266.
Note 2: If the FSB of your CPU is 533 MHz, the memory speed supports DDR 266/333
Note 3: If the FSB of your CPU is 800 MHz (Overclocked), the memory speed supports DDR 333/400


Expansion Slots
1 x AGP(3.0) 8X slot ( 1.5V & 0.8V only)
5 x PCI slots (PCI 2.3 compliant)


IDE Connectors
2 ATA100/66 Channels, up to 4 ATA 100 IDE devices


Onboard I/O Connectors
1 x Floppy Connector
3 x USB 2.0/1.1 header (6 ports by optional cable)
1 x CD_IN header
1 x S/PDIF in/out header (S/PDIF in/out cable optional)
1 x CPU fan header ( 1 fan rotation detection function )
2 x System fan headers ( 2 fan rotation detection function )
2 x 5 pin system panel header (Intel spec)
1 x 3 pin Power LED header
1 x Front audio header (Intel spec)
1 x IrDA header
1 x Case Open detection header
1 x Wake on LAN Connector


I/O via Back Panel
PS/2 keyboard/mouse, 2 x USB(2.0/1.1), RJ45,2 x Com(serial), 1 x Parallel, 1x Line-in/Line-out(Speaker Out)/MIC


Power
20-pin ATX power connector, 4-pin ATX 12V power connector


BIOS Feature
3Mb Flash EEPROM
Award BIOS with ACPI, DMI2.0, PnP, WfM2.0, Green Suspend to RAM (S3), Suspend to Disk (S4) Wake on keyboard/mouse, Wake on LAN/RTC Timer


Hardware Monitoring
3FAN sensors, CPU/System voltages and temperature monitoring


Special Feature
Zero Jumper Design
Adjustable CPU frequency by 1 MHz increment, Adjustable Vcore, VAGP, VMemory for overclocking
Watch Dog Timer (auto-reset system when it can not handle overclock configurations)
AGP Protection (The AGP Protection can ensure the AGP card voltage to be 1.5V, to protect the mainboard and the AGP card.)


Form Factor
ATX (244mm x 293mm)